CbFwV1 Low Solid Hardwood Platform Beds, large rail Canopy& Head Board; Options with CbFwV1s, CbFwV3, and CbFwV2 unusual HB - natural color

We create solid hardwood furniture in USA, customized best for you, free design consultation and prompt support. Order this listing or contact us with your change requests. All dimensions can be adjusted to fit your needs.

Hand crafted in Appalachia USA from solid hardwood (cherry, oak, maple, walnut (walnut priced higher)). These are very popular and durable woods for high quality furniture.

Photos 1,2, and 3 show cherry wood with no color added finished with Tung oil.

No veneers or compressed particle boards are used. The wood that is not normally seen (such as for slats) is a different hardwood species.

Extra cost options are billed separately.

Click Bed Size above to select your size.

CbFwV1 shown in photos 1, 2, and 3, is custom made for you. The listing price is for natural wood color finished with Tung Oil. This creates a beautiful natural bed. For an additional $200, you can choose from a wide range of colors of stain.

The canopy posts are about 2.8" x 2.8" square top to bottom and are 84" tall. The top rails are about 2.5" x 2.5" square.

The sides and ends sit on the floor and are about 11" tall (platform top about 11" above the floor).

The bed is a platform configuration for use without box springs. The bed is configured for a mattress resting on slats at the same level as the top of the sides. The queen and larger bed sizes have a center support under the slats that is not shown in the photos. The space between the slats is about 1.5". 20 slats are provided.

The platform will be about 12 inches wider than the mattress (6" on each side) and 9" longer than the mattress (6" at the foot end and 3 inches at the head end).

So the total outside dimensions of the bed are mattress width + 12 by mattress length +9 by 84" tall.

You can request different widths of the platform side and end boards. The platform wood that is exposed at the sides and ends will be the same as all the exposed wood finished like all of the visible wood.

The bed provided with this listing has a head board which is placed so the bottom of the head board is about 6" above the top of the sides. The top of the head board is about 30" above the top of the sides. The photos show a headboard that starts closer to the slats. You can request this style at a higher price.

A top cap board can be added on the top of the head board at added cost. Send us a message to request.

The bed is custom made for you. You can request almost any change that you would like.

CbFwV1s shown in photos 4, and 5, is custom made for you. The listing price is for the bed shown in the photos, but with natural wood color finished with Tung Oil. This creates a beautiful natural bed. For an additional $200, you can choose from a wide range of colors of stain.

The bed provided with this listing is as shown in the photos except for wood choice and color and mattress size.

The bed is a platform configuration for use without box springs. The bed is configured for a mattress resting on slats at the same level as the top of the sides. The queen and larger bed sizes have a center support under the slats that is shown in the last photo. The space between the slats is about 1.5". 20 slats are provided.

The photos show the bed made with cherry wood with black dye and with natural color maple head board panels all finished with Tung oil. Lee no longer uses black dye so another combination will be necessary

Extra cost options are billed separately.

The platform will be about 12 inches wider than the mattress (6" on each side) and 9" longer than the mattress (6" at the foot end and about 3 inches at the head end). You can request different widths of the platform side and end boards. The platform wood that is exposed at the sides and ends will be the same as all the exposed wood finished like all of the visible wood.

The sides and ends sit on the floor and are about 11" tall.

The canopy posts are about 2.9" x 2.9" square top to bottom and are 84" tall. The top rails are about 2.5" x 2.5" square.

The head board has two inset panels as shown in the photos 1 - 6. The listing price is for use of one wood species. You can request use of two wood species for an added cost. The bottom vertical part of the head board is about 8" tall and the top of the upper head board is about 37". Send us a message to get a price for a different size.

CbFwV3 shown in photos 6, 7, and 8, is as shown in the photos except for wood choice and mattress size.

The bed is a platform configuration for use without box springs. The bed is configured for a mattress resting on slats at the same level as the top of the sides. The queen and larger bed sizes have a center support under the slats that is not shown in the photos. The space between the slats is about 1.5". 20 slats are provided.

The platform will be about 24 inches wider than the mattress (12" on each side) and 15" longer than the mattress (12" at the foot end and about 3 inches at the head end). You can request different widths of the platform side and end boards. The platform wood that is exposed at the sides and ends will be the same as all the exposed wood finished like all of the visible wood.

The sides and ends sit on the floor and are about 7" tall.

The canopy posts are about 2.8" x 2.8" square at the bottom and are 84" tall and are turned toward the top as shown in the photos. The top rails are about 1.5" x 1.5" with rounded edges.

The head board is made of two 12" wide boards (with the top curved) that butt together with a peg between them. The bottom of the head board is about 8" above the top of the platform and the top of the head board is about 53" above the floor.

The bed is custom made for you. You can request almost any change that you would like.

CbFwV2 shown in 9 and 10, is custom made for you. The listing price is for natural wood color finished with Tung Oil. This creates a beautiful natural bed. For an additional $200, you can choose from a wide range of colors of stain. Please go to the section of my shop titled "wood species and color" to see photos of wood samples.

This bed has no drawers.

CbFwV2 is a platform configuration for use without box springs. It is similar to CbFwV1 but with a unique headboard style. The bed is configured for a mattress resting on slats at the same level as the top of the sides. The queen and larger bed sizes have a center support under the slats that is not shown in the photos. The space between the slats is about 1.5". 20 slats are provided.

The platform extension is about 1.5" thick at the sides. The platform will be about 16 inches wider than the mattress (8" on each side) and 10" longer than the mattress (8" at the foot end and 2 inches at the head end). You can request different widths of the platform side and end boards. The platform wood that is exposed at the sides and ends will be the same as all the exposed wood finished like all of the visible wood.

The sides and ends sit on the floor and are about 14" tall. The sides are flat boards the same as the foot end.

The head end of the bed has a vertical head board that is about 26" tall made of two 13" tall boards. The top of the upper board is about 49" above the floor. The bottom of the lower board is about 8" above the top of the slats.

Above the top of the head board are two side to side beams with special shapes. The lower of the two beams passes through holes in the head end canopy posts. Each end of the upper beam is about 12 inches beyond the outside face of the post. The top of the ends of the upper beam above the floor is about 65".


Most furniture in high priced stores is made of pressed materials with thin veneers. Such materials are easily damaged and are difficult to repair. They also often give off unhealthy fumes.

The cost of shipping is included in the listing price for shipping to a location in the 48 states that can be reached by a delivery truck. If your location is different, please ask us to suggest a shipping solution for you. A quote for shipping to Alaska, Hawaii, or Canada can be provided upon request or you can use a freight forwarder and ask us to ship to the forwarder.

When placing your order please type a note stating all of the options and variations you request to make this best for you. If you see a desired special feature in any photo include that request in your added written note. We will send a separate invoice for the cost of your changes to the listing. The listing you order plus your added note coupled with policy statements in this web site are the total statement of your order. Messages of any other type are not part of the order.

Photos of our wood and stain choices can be found at: https://solidcherryheirlooms.patternbyetsy.com/shop/18261527/wood-species-and-stains

Our wood is from the forests in the Appalachian region of the United States that have been harvested for hundreds of years. Wood is God's natural creation and as a result grain patterns and variation in color and character in the wood are different in each piece of furniture and will not be a match with the listing photos. The unique color, grain and appearance are part of the unique one-of-a-kind qualities of your furniture.

Beds are shipped in pieces that lay flat in a box and require assembly. This enables better protection of the product and lower shipping costs. Detailed instructions are provided. Dressers, desks, shelves, and bedside tables ship fully assembled except for some that need to be attached to a wall and a few that have removable legs.

As designers and builders of custom solid hardwood furniture, we are practical artists devoted to the creation of attractive forms in beautiful wood that meet functional needs and provide visual pleasure for generations of users.